guys, there should be a code that should be done to manage the platform lights and the light in the smartphone charging compartment, in multiple colors like the soft lights on the doors, obviously the relative ceiling lights must also be replaced; Do you know what the encoding could be?
Diskussion: Was wollt ihr Codieren? | Codieranfrage/n
-
-
You can only change the brightness, these are the xd /xs values in the 09 controller. (Interior_light%) but these are all related. XS is e.g. also the brightness of the control panel of DSG.
-
I thought it could be done, here in Italy Enrico Mosca did it on audi q3
-
Wann kommt endlich full keyless codierung
Mit freundlichen Grüßen
-
I thought it could be done, here in Italy Enrico Mosca did it on audi q3
The Q3 has LIN-Bus for this. The Formentor not. This is also the reason why you can't install colored footwell lighting and original ambient lighting in the back without a huge effort.
Your solution is similar to OEM, but because of the missing LIN bus only so controllable. Ideal solution (I do in the summer) pull a LIN bus to the rear for MIB3 control.
-
-
Wann kommt endlich full keyless codierung
Mit freundlichen Grüßen
Dann wenn ich Zeit habe weiter zu schreiben, ich mach das ganze nur in der Freizeit und mache gerade mit der Frau einen kurzen Entspannungsurlaub vom Alltag 🤷🏼♂️
-
Ich wünsche dir und deiner Familie schönen Urlaub erhole dich mein bester
LG
-
yes, I'm also planning how to pull the LIN of the soft lights up to the age of the rear doors, I have to decide whether to look for it in the BCM or pull it directly from the front doors without risk of making a mistake in the cable, but I have to overcome the obstacle of the cable glands. another complication is to find a compatible led strip that can adapt to the rear doors
-
kurze Frage zu der Keyless Advanced Codierung:
Die Spiegel werden beim Automatischen Ver/entriegeln bei Annäherung nicht ein oder ausgeklappt richtig?
Kann im Infotainment die Funktion aktiviert und deaktiviert werden? Oder geht dort nur Keyless generell ein und auszuschalten.
-
Doch werden sie. Wie ohne auch. Außer man hat das lange drücken codiert.
-
-
Frage zu Keyless Advanced
Bei mir wird der Eintrag im Infotainment System nach der codierung nicht angezeigt.
MJ ist 22
-
Bus Ruhe abwarten, ansonsten kann's dein System nicht. Wäre aber merkwürdig wenn du alles so codieren konntest.
-
Bus Ruhe abwarten, ansonsten kann's dein System nicht. Wäre aber merkwürdig wenn du alles so codieren konntest.
Wozu sind die Optionalen Codierungen? Z.B. mit der Klemme 15 ?
-
Frage zu Keyless Advanced
Bei mir wird der Eintrag im Infotainment System nach der codierung nicht angezeigt.
MJ ist 22
Okay es fehlt noch was, hab ich vergessen zu schreiben, ergänze ich in den nächsten 2h
Knakx theoretisch bei der OEM Alarmanlage sollte es ein Feedback geben, kann ich aber nicht testen, bei mir ändert das nix.
-
Codierliste ist geupdated, habe die HMI-Einstellungen vergessen
-
-
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!